The perfect remote training collar to make training your furry best friend a breeze.
This collar also includes a waterproof, rechargeable remote with a range of 1500ft.
Discourage bad behaviour with the choice of a sound warning tone, vibration safe, humane shock to get the best results for you and your loved dog.
Function: Sound Vibration & Shock
Feature 1: With both Automatic bark collar and Remote training collar Function
Feature 2: Rechargeable with long battery life, long standby time
Feature 3: 1500 Feet Remote Distance control
Feature 4: Waterproof IPX65
Feature 5: Combined Training modes remote dog training collar
Sensitivity: 1-100 Adjustable Sensitivity Levels
Apply dogs: Suitable for all size dogs
Before using the electric shock function, you could first remind the pet by using the vibration (warning tone). When the dog has the stress reaction, you can reduce the current, or just use the vibration.
About Anti-abrasion Buckle:
After you have corrected dogs’ bad behavior, we can put the anti abrasion buckle on the receiver, and then let the dog keep wearing the collar. The soft silicone material is comfortable, on the other hand, the non-conductive silicone material is isolate with the electric shock function and prevent hurting the dog from being accidentally pressed the electric shock mode. At the same time, the electric shock collar with insulated anti-abrasion buckle has a certain deterrent effect to the dog.
Blow to the sensitivity hole at the middle of the device
The first and the second time, it will produce the warning sound. When the device starts the third time, the static electricity is emitted. Put the white test lamp on the two electrode screws of the device could test the electric shock function and the test lamp will emit light. After the product works for seven times, the indicator light will enter into fast flashing state, the device will stop working for 1 minute, and enter into the initial standby state, and then cycle.
Suitable for all kinds of Dogs over 2 months old, weight 2-110 lbs, with neck width of 5-60 cm
Remote Mode Introduction:
Warning sound: To remind Dog stop barking by producing the warning sound.
Vibration: Training and Punishing Dogs’ bad behavior by the 1-100 levels vibration.
Shock: Training and Punishing Dogs’ bad behavior by the 1-100 levels shock, this is more intense.
Smart Automatic Mode Introduction
Electric shock: The electric shock intensity will increase step by step, the first and second time was waning sound only, the rest 5 times were electric shock. Total 7 times working. After the 7 times working, the device will stop working for 30 seconds, and enter into the initial standby mode, and then cycle.
Open or Close The automatic anti bark function: Make sure the device is in Power on state, Long pressing the Remote Switch button “3” seconds, when the receiver “beep” 1 time, the automatic anti bark function opened.
Long pressing the remote switch key 3 seconds, when the receiver ”beep” 2 times, the automatic anti bark function closed.
Switch on/off: How to switch on/off receiver: Short press the switch on/off button, it will power on; Press again and the device beep for long, the device is off.
When received goods need to charge the device for 3 hours in the off mode.
When shake the receiver, it will produce sound. this is the induction ball inside the receiver.
Every dog reacts differently to the electric shock and vibration. It is recommended to start the test from low level when using electric shock or vibration mode. The continuous wearing time should not exceed 10 hours.